TELEMAC-MASCARET Forum: Issue about VALUE OF THE TRACERS AT THE SOURCES (1/1)

Welcome, Guest

TOPIC: Issue about VALUE OF THE TRACERS AT THE SOURCES

Issue about VALUE OF THE TRACERS AT THE SOURCES 11 months 1 week ago #45303

shihangliu
OFFLINE
Fresh Boarder
Posts: 6

Hi, i am trying to simulate a TELEMAC-3D case coupling with GAIA, which contains 3 sources and 1 tracer. In the t3d.cas, following the error message, i have given 6 VALUEs OF THE TRACERS AT THE SOURCES. However, it still didn't work. Has anyone else had this problem and can help me out?

The attachments is the cas for telemac-3d and the error.

Also, I'd like to inquire about the keyword VALUE OF THE TRACERS AT THE SOURCES, which is still required even though I've created a file of sources and tracers over time for import. Will this keyword definition be replaced by my source file when my case is running normally?

Attachments:

The administrator has disabled public write access.

Issue about VALUE OF THE TRACERS AT THE SOURCES 11 months 1 week ago #45304

c.coulet
OFFLINE
Moderator
Posts: 3799
Thank you received: 1056

Hi
The computation stops in lecdon_telemac3d.F

      IF(NTRAC.GT.0.AND.NPTSCE.GT.0) THEN
        DIMTOT=DIMEN(2,84)
        IF(INCLUS(COUPLING,'GAIA').AND.IND_SED.GT.0) THEN
          DIMTOT=DIMEN(2,84)+NSEDSCE
        ENDIF
        IF(DIMTOT.NE.NTRAC*NPTSCE) THEN
          WRITE(LU,*) 'WRONG NUMBER OF'
          WRITE(LU,*) 'VALUE OF THE TRACERS AT THE SOURCES'
          WRITE(LU,*) DIMEN(2,84),' GIVEN'
          WRITE(LU,*) NTRAC*NPTSCE,' EXPECTED'
          CALL PLANTE(1)
          STOP
        ENDIF

In the Telemac steering file, you should have 3 values (1 tracer and 3 sources) in VALUE OF THE TRACERS AT THE SOURCES... (DIMEN(2,84))
In GAIA, the number of values of SUSPENDED SEDIMENTS CONCENTRATION VALUES AT THE SOURCES gives the value of NSEDSCE which should also be 3 if you have only 1 sediment.
As you give 6 values in telemac, the comparison give DIMTOT = 9 and NTRAC*NPTSCE = 6...
I think if you give only 3 values in telemac steering file (as it should be), this will be OK
As the message print DIMEN(2,84) and not DIMTOT, this is confusing...
THis should be something to correct for the next version...

Hope this helps

Christophe

The administrator has disabled public write access.

The following user(s) said Thank You: pham

Issue about VALUE OF THE TRACERS AT THE SOURCES 9 months 2 weeks ago #45554

pham OFFLINE Administrator Posts: 1622 Thank you received: 621	Hello, FYI, I pushed the fix today on the main. It will be available in next release. Thanks for pointing this bug shihangliu and solving it Christophe. Chi-Tuan
	The administrator has disabled public write access.