Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
System Modules
MASCARET
wetted perimeter <=0
Flat Threaded

TOPIC: wetted perimeter <=0

wetted perimeter <=0 8 years 2 weeks ago #26962

  • abdo533
  • abdo533's Avatar
Hi everyone
in every simulation i make in fudaa, with a different parameters, it gives me always the same message, " wetted perimeter <=0 ", how can i exceed this problem please ?
regards
The administrator has disabled public write access.

wetted perimeter <=0 8 years 2 weeks ago #26963

  • c.coulet
  • c.coulet's Avatar
  • OFFLINE
  • Moderator
  • Posts: 3799
  • Thank you received: 1056
Hi
could you give more details about your model and the computation and/or join the *.masc file in order to let us see where the problem is

Regards
Christophe
The administrator has disabled public write access.

wetted perimeter <=0 8 years 2 weeks ago #26964

  • abdo533
  • abdo533's Avatar
Hi, thanks
now it gives me another problem ( point abscissa is out of bounds for interpolation)


Regards
The administrator has disabled public write access.

wetted perimeter <=0 8 years 2 weeks ago #26976

  • c.coulet
  • c.coulet's Avatar
  • OFFLINE
  • Moderator
  • Posts: 3799
  • Thank you received: 1056
You probably have a problem in a given law and the initial computation time...
Regards
Christophe
The administrator has disabled public write access.
The following user(s) said Thank You: abdo533

wetted perimeter <=0 6 years 5 months ago #32699

I encontered the same error (wetted perimeter <=0) rencently. In one of the cross-section, the left bank and right bank of the cross-section were defined at the same point. I fixed it and there's no error any more.
The administrator has disabled public write access.
Flat Threaded
Moderators: JFourdrinoy
Forum
System Modules
MASCARET
wetted perimeter <=0

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.